Basic one-time settings for Yaesu FTDX-10 I am not claiming that these are the best, most important or “only”. These are the settings that I have made and with which I work successfully. They are made once and generally do not need to be changed, which is why I have […]
Yaesu
5 posts
CW Operation CW Operation Settings by Hearing If you were working in digital modes before switching to CW, be sure to turn off SPLIT (if necessary), narrow the bandwidth and turn on transmission with the Morse code manipulator (and the automatic key if necessary). Depending on the range, you will […]
FT8/FT4 Operation <MODE> <PRESET> and <DATA-U> (both to be included) <R.FIL> <3 kHz> Checking the exact time https://time.is/ The exact time is updated at >200 ms with NetTime http://www.timesynctool.com A blank space is preferred for broadcasting from the waterfall. Checking the exact time at https://time.is/ Setting […]
SSB Operation The following are basic settings for SSB and other telephone working modes. If you have worked in digital modes before switching to SSB/FM/AM, do not forget to turn off SPLIT (if necessary), change the skipped frequency band (if necessary). Depending on the range, you will also need to […]
Extending the transmission range Backstory Some time ago, a friend and radio amateur (I’m not writing who he is, because I haven’t asked him if he can) shared that he can’t broadcast on part of the 60m range. He assumed that his Yaesu FTDX-10 transceiver, because it was prepared for […]